HobbyKing
TURNIGY G32 BRUSHLESS OUTRUNNER 770KV
| RPM | 770kv |
| Max current | 42A |
| No load current | 10V/2.4A |
| Current capacity | 55A/15sec |
| Internal resistance | 0.02 ohm |
| Diameter of shaft | 5mm |
| Dimensions | 72x42mm |
Battery:, 3~4 Cell /11.1~14.8V, Weight:, 212g (not including connectors),
Designed to be a direct swap out for your 32 ...5 Reviews
HobbyKing
HXT UBEC 5/6V OUTPUT, 5.5~23V INPUT
| Output | 5v/3a & 6v/3a (Selectable via jumper) |
| Ripply | <50mVp-p(@2A/12V) |
| Input | 5.5v~23v (2 to 5s) |
| Size | 41.6mm*16.6mm*7.0mm |
| Weight | 12.5g |
5 Reviews
HobbyKing
TURNIGY NANO-TECH 370MAH 3S 25~40C LIPO PACK
| Discharge Plug | Mini-JST Connector |
: 370mAh, : 3S1P / 3 Cell / 11.1V, : 25C Constant / 40C Burst, : 39g (including wire, plug & case), : 60x31x13mm, : JST-XH,
More than just a fancy name. TURNIGY nano-tech lithium polymer ...5 Reviews
HobbyKing
TURNIGY PARK300 BRUSHLESS OUTRUNNER 1380KV
| Battery | 2~3 Cell /7.4~11.1V |
| RPM | 1380kv |
| No load current | 8V/0.4A |
| Current capacity | 9A/15sec |
| Internal resistance | 0.33 ohm |
| Weight | 24g (not including connectors) |
| Diameter of shaft | 3mm |
| Dimensions | 37x28mm |
Max current: 7A,
Designed to provide reliable and clean power for 3D parkflyers. ...5 Reviews
HobbyKing
TURNIGY NANO-TECH 2200MAH 2S 25~50C LIPO PACK
| Discharge Plug | XT60 |
: 2200mAh, : 2S1P / 2 Cell / 7.4V, : 25C Constant / 50C Burst, : 133g (including wire, plug & case), : 112x35x18mm, : JST-XH,
More than just a fancy name. TURNIGY nano-tech lithium polymer ...5 Reviews
HobbyKing
J3 GREEN AIRPLANE MODEL W/ BRUSHLESS SYSTEM (PNF)
| Wingspan | 955mm |
| Wing area | 13.7dm2 |
| Length | 730mm |
| Weight | 470g |
| Motor | 2410 brushless outrunner |
| ESC | 20A |
| Servos | 2x9g |
| Battery compartment size | 50x50x41mm |
| Required | TX & RX |
5 Reviews
HobbyKing
BMS-L530DMG+HS 1/5 SCALE DIGITAL SERVO (MG) 19.8KG / .15SEC / 140.5G
| Weight | 140.5g / 4.96oz |
| Dimensions | 59.6 x 29.9 x 55.48mm / 2.35" x 1.18" x 2.18" |
| Torque At 4.8V | 19.8kg/cm , 262 oz/in |
| Torque At 6.0V | 24.3kg/cm , 348 oz/in |
| Speed At 4.8V | 0.15 sec / 60° at no load |
| Speed At 6.0V | 0.12 sec / 60° at no load |
3 Reviews
HobbyKing
TURNIGY MINI ANEMOMETER (WIND METER)
Features:, Wind speed measure in mph, ft/min, km/h, m/s or knots,
Turnigy Mini Anemometer (Wind Meter) Wind speed in Beaufort wind ...5 Reviews
HobbyKing
ASP S61A TWO STROKE GLOW ENGINE W/REMOTE HS NEEDLE VALVE
| Displacement | 9.95 |
| Bore | 24.00mm |
| Stroke | 22.00mm |
| Suggested prop | 11*6 |
| RPM | 2,000 ~ 18,000 |
| Weight | 675g |
5 Reviews
HobbyKing
TCF 23X8 HIGHPRECISION CARBON FIBER SPORT PROPELLER
| Weight | 160g |
| Prop hole | 10mm |
5 Reviews
HobbyKing
TURNIGY 5-7.5A (8~42V) HV UBEC FOR LIPOLY
| Output (Constant) | 5v/5A or 6v/5A |
| Input | 8v-42v (3-10cell lipo) High Voltage |
| Size | 48x27x9mm |
| Weight | 37g |
| Quiescent current | 20mA |
Type: Switching, however because of the noise reduction (thin metal case & filter) this unit gives the same noise as a Linear BEC.,
Power your receiver and servos with the baddest of UBEC ...5 Reviews
HobbyKing
FIGHTER R/C JET EPO PLUG-N-FLY
| Wing Span | 840mm |
| Length | 1030mm |
| Flying Weight | 650g |
| Servo | 9g * 3pcs |
| EDF Diameter | 64mm |
Specification:, Motor:, 2839 Brushless outrunner (3200KV), ESC:6, Battery:, 1600mAh 3S1P 20C Lipoly Pack (Not Included), Required:, Your own TX & RX (with V-type mixing),
An excellent parkflyer sized EDF jet (EPO). The jet comes ...5 Reviews
HobbyKing
680MM MS COMPOSIT 3D NIGHT MAIN BLADES
| Length | 680mm |
| Width | 60mm |
| Grip | 12mm |
| Hole | 4mm |
5 Reviews
HobbyKing
TURNIGY NANO-TECH 370MAH 2S 25~40C LIPO PACK
| Discharge Plug | Mini-JST Connector |
: 370mAh, : 2S1P / 2 Cell / 7.4V, : 25C Constant / 40C Burst, : 27g (including wire, plug & case), : 63x32x9mm, : JST-XH,
More than just a fancy name. TURNIGY nano-tech lithium polymer ...5 Reviews
HobbyKing
HEXTRONIK DT750 BRUSHLESS OUTRUNNER 750KV
| Required Voltage | 11.1v |
| Suggested Battery Capacity | 1300mAh + |
| Suggested Prop | 11x3.8 or 11x4.7 |
| Max current draw | 18A (with 11x4.7 prop) |
| Max thrust | 1000g+ |
| No Load Current | 1.4A |
| Shaft | 4M (perfectly suited to Towerpor/GWS SF Slow Fly props) |
| Weight | 78g |
| Diameter | 41mm |
| Overall length | 77mm |
Kv: 750rpm/v,
Looks can be deceiving. This outrunner is around twice the ...5 Reviews